Class default

constructor

• new default(peripheral): default

• Parameters

  • peripheral: null | BleRemotePeripheral

  Returns default

_peripheral

keys

onbuttonpressed

Optional ondisconnect

params

requiredKeys

connectWait

• connectWait(): Promise<void>

• Connect the sensor

  センサへ接続

  Returns Promise<void>

disconnectWait

• disconnectWait(): Promise<void>

• Disconnect from the sensor

  センサから切断

  Returns Promise<void>

getLedMode

• getLedMode(): Promise<void>

• Returns Promise<void>

  Deprecated

  Please use getLedModeWait

  getLedModeWait の使用を推奨

getLedModeWait

• getLedModeWait(): Promise<void>

• Get LED mode LEDモードの取得

  Returns Promise<void>

  current LED mode 現在のLEDモード

  0: off 消灯

  1: PM2.5 mode PM2.5モード

  2: PM10 mode PM10モード

  3: VOC mode VOCモード

  4: UV mode UVモード

  5: temperature mode 温度モード

  6: humidity mode 湿度モード

  128: power LED 電源LED

measureOneShotExtWait

• measureOneShotExtWait(): Promise<{
      barometricPressure: number;
      eco2: number;
      humidity: number;
      lux: number;
      pm10: number;
      pm2_5: number;
      temperature: number;
      tvoc: number;
      uv: number;
  }>

• Do extended one shot measurement

  拡張ワンショット計測

  Returns Promise<{
      barometricPressure: number;
      eco2: number;
      humidity: number;
      lux: number;
      pm10: number;
      pm2_5: number;
      temperature: number;
      tvoc: number;
      uv: number;
  }>

  one extended shot measurement data 拡張ワンショット計測データ

  {
  
  pm2_5: PM2.5 concentration PM2.5濃度 (25~1000 [ug/m3]),
  
  pm10: PM10 concentration M10濃度 (25~1000 [ug/m3]),
  
  barometricPressure: barometric pressure 気圧 (300.0~1100.0 [hPa]),
  
  temperature: temperature 温度 (-20.0~85.0 [degC]),
  
  humidity: relative humidity 湿度 (0.0~100.0 [%RH]),
  
  lux: illuminance 照度 (0~65534 [lx]),
  
  tvoc: TVOC (Total Volatile Organic Compounds) (0~1187 [ppb])
  
  eco2: eCO2 (equivalent CO2) 等価CO2濃度 (400~8190 [ppm])
  
  uv: UV Index (0~11)
  
  }
  Copy

measureOneShotWait

• measureOneShotWait(): Promise<{
      barometricPressure: number;
      humidity: number;
      lux: number;
      mode: number;
      pm10: number;
      pm2_5: number;
      temperature: number;
  }>

• Do one shot measurement

  ワンショット計測

  Returns Promise<{
      barometricPressure: number;
      humidity: number;
      lux: number;
      mode: number;
      pm10: number;
      pm2_5: number;
      temperature: number;
  }>

  one shot measurement data ワンショット計測データ

  {
  
  pm2_5: PM2.5 concentration PM2.5濃度 (25~1000 [ug/m3]),
  
  pm10: PM10 concentration M10濃度 (25~1000 [ug/m3]),
  
  barometricPressure: barometric pressure 気圧 (300~1100 [hPa]),
  
  temperature: temperature 温度 (-20~85 [degC]),
  
  humidity: relative humidity 湿度 (10~70 [%RH]),
  
  lux: illuminance 照度 (0~65535 [lx]),
  
  mode: mode flag モードフラグ (0: 連続計測, 1: 最新計測データ, 3: ワンショット)
  
  }
  Copy

wired

• wired(obniz): void

• Parameters

  • obniz: Obniz

  Returns void

Static info

• info(): ObnizPartsInfo

• Returns ObnizPartsInfo

Static isDevice

• isDevice(peripheral): boolean

• Verify that the received peripheral is from the REX_BTPM25V

  受け取ったPeripheralがREX_BTPM25Vのものかどうかを確認する

  Parameters

  • peripheral: BleRemotePeripheral

    instance of BleRemotePeripheral BleRemotePeripheralのインスタンス

  Returns boolean

  Whether it is the REX_BTPM25V

  REX_BTPM25Vかどうか